全文获取类型
收费全文 | 190篇 |
免费 | 334篇 |
国内免费 | 59篇 |
专业分类
测绘学 | 7篇 |
大气科学 | 2篇 |
地球物理 | 34篇 |
地质学 | 506篇 |
海洋学 | 14篇 |
天文学 | 1篇 |
综合类 | 18篇 |
自然地理 | 1篇 |
出版年
2024年 | 1篇 |
2023年 | 2篇 |
2022年 | 15篇 |
2021年 | 27篇 |
2020年 | 8篇 |
2019年 | 18篇 |
2018年 | 22篇 |
2017年 | 17篇 |
2016年 | 27篇 |
2015年 | 29篇 |
2014年 | 27篇 |
2013年 | 66篇 |
2012年 | 30篇 |
2011年 | 28篇 |
2010年 | 27篇 |
2009年 | 30篇 |
2008年 | 20篇 |
2007年 | 22篇 |
2006年 | 20篇 |
2005年 | 18篇 |
2004年 | 10篇 |
2003年 | 7篇 |
2002年 | 8篇 |
2001年 | 11篇 |
2000年 | 15篇 |
1999年 | 12篇 |
1998年 | 17篇 |
1997年 | 9篇 |
1996年 | 13篇 |
1995年 | 5篇 |
1994年 | 8篇 |
1993年 | 2篇 |
1992年 | 2篇 |
1991年 | 2篇 |
1990年 | 2篇 |
1989年 | 1篇 |
1987年 | 1篇 |
1986年 | 1篇 |
1985年 | 3篇 |
排序方式: 共有583条查询结果,搜索用时 15 毫秒
11.
干热岩试验性开发井钻井施工,在高温硬岩的地层条件下,如何实现高效钻进仍存在很多技术难点。空气潜孔锤钻进技术是解决硬岩地层钻进的有效方法之一,潜孔锤钻头是空气潜孔锤钻进的关键器具。根据青海共和干热岩GH-01井空气潜孔锤钻进技术应用情况,分析探讨了空气潜孔锤钻头断齿、掉齿、磨损严重、使用寿命短等问题,从钻头结构设计、钻头材料选取、钻头冷压固齿工艺等几个方面对空气潜孔锤钻头进行了优化。固齿优化过程中采用有限元分析方法,对钻头冷压固齿过盈量进行仿真分析计算,根据分析计算结果确定最优固齿过盈量。通过对潜孔锤钻头结构、材料、加工等优化,为适用于高温硬岩的空气潜孔锤钻头研制提供了借鉴。为提高空气潜孔锤钻进综合效率,为干热岩钻探开发提供了技术支持和技术储备。 相似文献
12.
共和干热岩资源富集于花岗岩地层,硬度高,研磨性强,部分层段裂隙发育,取心困难。针对干热岩地层和取心需求特点,研制一套KT178取心钻具,并配套设计了孕镶金刚石取心钻头。该钻具为单动双管取心钻具,可配套井底动力钻具使用,设计中注重对钻具外管、卡簧等关键部件的强度校核。在GH-01井和GH-02井中,经过两轮实验和优化,钻具逐渐成熟,获取了较完整的岩心样本,满足干热岩勘探取心要求,具备了向页岩气、水资源勘察等具有间断取心需求的同类工程推广应用的条件。 相似文献
13.
邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。 相似文献
14.
LF7-2油田位于我国南海珠江口盆地LF区块,是一个小规模油田,根据前期探井揭示,上部地层以厚层泥岩为主,极易水化、分散,使钻井液性能变差;起下钻过程中钻具遇卡、遇阻等复杂情况频繁发生;钻头选型不尽合理,易泥包;下部地层以砂泥岩互层为主,岩石致密、可钻性变差,钻具扭矩、摩阻增加,定向钻进时滑动困难,井眼轨迹控制难度大,给钻井提速增效带来诸多困难。根据探井地质情况和岩石力学剖面,利用钻井软件优选平台位置,对开发井井身结构、井眼轨迹、钻柱力学、钻井液、固井等方面进行钻井仿真模拟,制定出科学的钻井设计方案,在直井段采用“牙轮钻头+直螺杆+MWD”钻具开展防斜打直,造斜段使用“PDC钻头+弯螺杆+MWD/LWD”开展复合钻井,水平段采用“PDC钻头+PowerDriver+MWD/LWD”开展旋转导向钻井,实现精准化钻井,顺利完成6口开发井施工。现场应用单井平均机械钻速29.43 m/h,钻井工期191.59 d,工期比设计提前28.41 d,钻井提速增效显著,降低开发成本。通过PowerDriver的近钻头井斜、自然伽马实时测量和传输,减少地质误判,实现对储层顶界面的实时探测,使储层钻遇率达100%,收到较好的经济效益和投资回报,实现小油田的效益开发。 相似文献
15.
哈萨克斯坦科扎萨伊油田钻井地质环境复杂,储层位于盐下,钻遇的地层层系多,地层性质差异大,具多套压力系统。钻井过程中发生地层漏失、坍塌、掉块及盐膏层蠕变等复杂情况,严重影响了钻井时效和钻井安全。针对这些技术难题,开展了油田井身结构、井身质量、提速潜力、高效钻头等分析与优化,提出了预弯曲钻具高倾角地层井斜控制技术、混合钻头减震提速技术,以及PDC-孕镶块复合钻头高研磨性地层提速技术。现场应用取得了较好的效果,平均机械钻速提高50%以上,钻井周期缩短28%。 相似文献
17.
This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
18.
19.
20.